CAD
3 TIER WATER FOUNTAIN
Four Feet of Concrete, Which Is Why It Looks Like It Belongs There
A classical three tier fountain standing 48 inches in aged buff concrete. The lower basin carries fleur de lis relief around its rim, the middle bowl is fluted, and a ribbed urn form sits at the summit. Water leaves the top, fills each tier, and spills over the rims in even sheets.
Concrete is the reason this reads as permanent rather than placed. Resin fountains at this height weigh thirty to sixty pounds and always look slightly light for their size, because the eye knows what stone should weigh. Real cement has the mass the shape implies, and it weathers the same way the paving and walls around it do.
Four feet is also the height at which a fountain stops being an object in a garden and starts being the thing the garden is arranged around. Below about three and a half feet it reads as a feature. At 48 inches it reads as an anchor.
What Makes This Fountain Different
- Real concrete, which the eye recognises before you consciously do. Everyone has a sense of what a stone object of a given size should weigh, and resin fountains fail that test quietly. They look correct in a photograph and slightly wrong in person, because the proportions say stone and the presence says plastic. Cement removes that mismatch entirely. It also means the surface will darken with rain, lighten as it dries, and take moss on the shaded side over years, so the piece integrates rather than staying new looking and separate.
- Fleur de lis relief on the lower rim. The carved motif runs around the widest and most visible part of the fountain, which is where classical pieces usually put their detail. It also breaks the overflow into separate strands rather than letting it leave as one continuous sheet.
- Four feet is a category change. At 48 inches this reads across a lawn, from a window inside the house, and from a driveway. Smaller fountains are noticed once you are near them. This one organises the space it stands in.
- Symmetrical from every side. There is no front and no back, so it works in the middle of a lawn, at the centre of a courtyard, or anywhere approached from more than one direction.
Full and layered. Three tiers means three separate overflows at three heights, and the carved rim breaks each one into strands rather than a single sheet. The result carries a few metres and softens background noise on a patio, which smaller fountains cannot. How loud it seems will still shift with the water level and the hard surfaces around it, which is why a fixed decibel number would tell you nothing useful about your own garden.
Quick Specifications
| Design | Three tier classical fountain with fleur de lis relief |
|---|---|
| Material | Concrete |
| Finish | Aged buff stone |
| Height | 48 in. |
| Water flow | Three tier overflow cascade |
| Pump | Included recirculating pump |
| Power | AC plug in, 110V |
| Water connection | Self-contained, no plumbing required |
| Assembly | Required, tiers ship separately |
| Recommended use | Outdoor, year round |
Setup, Care, and Warranty
Assembly and placement
The tiers stack on site with no plumbing to connect. Concrete at four feet is a two person job, so decide the position before assembly rather than after.
Set it on level solid ground. A prepared pad or paving is better than bare soil, where this weight settles unevenly within a season and a tilted symmetrical fountain is immediately obvious.
Water level and daily care
Keep enough water in the base to cover the pump at all times. Three open tiers plus a wide basin lose water to evaporation faster than an enclosed design, so check every few days in warm weather.
Clear debris from the bowl rims. Anything sitting on the carved relief interrupts the strands and leaves a visible gap in the overflow.
Caring for the concrete
Use a soft brush and water, and keep harsh liquid cleaners off the surface. In hard water areas a pale film builds along the rims where the water leaves, and it is easier to remove before it sets into the relief than after. Moss on the shaded side is normal on concrete outdoors and generally improves the look rather than harming it.
Winter and freezing weather
Dry concrete handles cold. Water freezing inside it is what causes cracking. Before hard freezes, drain the base and every tier completely, disconnect and store the pump indoors, and let the piece dry. Cover it once drained so rain and snow do not refill the bowls through winter.
3 year warranty
This product includes a 3 year warranty. Coverage, claim requirements, and required documents are subject to the warranty policy that applies at the time of purchase. Keep your order confirmation, and contact customer support with your order details if service is needed.
Questions Before You Choose
Is it real concrete?
Yes, which is why it is heavy and why the surface is matte rather than glossy. It will darken in rain and take moss on the shaded side over years. It also means draining before hard freezes matters more than it would on resin.
Where does it belong?
The centre of a lawn, a formal courtyard, a front garden, the end of a sightline from the house. Because it is symmetrical it works where people approach from several directions. At four feet it wants space around it rather than a tight corner.
Can one person assemble it?
Plan for two. The parts stack without tools, but lifting concrete tiers into position safely is not a one person task, and getting the base wrong means dismantling it again.
Is it safe around children and pets?
Concrete weight makes it stable, which is safer than a light tall fountain, but the upper tiers should never be climbed or hung on. Set it on level solid ground away from the main running route, and run the cord along a bed edge so it will not catch a foot. The recirculating water is not intended for drinking.
No Video
WorldWide
Guarantee
Payment
Policy
